ANIOS CLEAN EXCEL D

• Patented concept
• Original combination of active substances in synergy
• High level of detergence demonstrated
• Non-corrosive, compatible with a broad range of materials

Application area

Cleaning and disinfection of medical devices: surgical and medical instruments, heat-sensitive instruments and endoscopy equipment, before sterilisation.

Instructions for use

1. Dilution at 0.5 %: Pour a 25 ml dose per 5 litres of cold or tepid water. Renew the soaking bath once a day at least.
2. Totally immerse medical device. Soaking time: 15 minutes. Brush if visible soiling is present. For endoscopic equipment: brush channels.
3. Thoroughly rinse treated medical devices with tap water (good microbiological quality) to remove all traces of product and organic soiling. For endoscopic equipment: rinse internal and external parts.
4. Dry with a clean towel. Proceed to the next step (see protocol established by the service).

Ingredients

Didecyldimethylammonium chloride, chlorhexidine digluconate, non-ionic surfactants, perfume, colouring, excipients.

Storage

Dangerous – respect the precautions for use (drawn up according to the European rules in force regarding the classification and labelling of chemical products). Storage: between +5°C and +35°C./p>

Products characteristics

• Detergent and disinfectant designed to reduce the risk of surface biofilm formation on medical devices
• Broad antimicrobial spectrum to limit the risk of cross-contamination and ensure the safety of personnel
• Active against MdRB
• Formulation active in fresh and hard water
• Formulation non-corrosive and compatible with a broad range of materials 
• Improvement of the ecotoxicological prole: GHG* emissions reduced by 47% relative to a similar product
• Good rinseability
• Can be used in an ultrasound cabinet
• Clear blue solution
• Pure product pH: min. 6.5 - max. 7.5
• pH at 0.5% in mains water: 7.4
• Lemon fragrance

Microbiological Properties