Sekusept™ Cleaner provides excellent cleaning properties and short operating time. Designed for pre-cleaning endoscopic and medical materials, it removes organic residues. This product can also be used in ultrasonic cleaners.
Securely removes stains of all types.
|Our performance||Your advantage|
|Good material compatibility||For gentle, manual pre-cleaning of medical Instruments, thermolabile accessories and flexible endoscopes. Also suitable for respirator masks and accessories. Suitable for use in ultrasonic baths.|
|Powerful cleaning surfactant combination||Removes even tough organic stains such as dried blood and protein.|
|User-friendly formulation||Pleasant smell, slightly green-yellow coloration ensures good recognition of the instruments in the solution, low application concentration.|
Normal dosing 0,5 to 1%, for heavier stains maximum 2%. If Sekusept™ Cleaner is used as cleaning intensifier, only use disinfectant solution first, then add Sekusept™ Cleaner.
Instructions for Use: Place instruments in the solution, ensuring complete wetting. Clean the instruments according to the instructions for use by the instrument manufacturer, including mechanisms (e.g. brushing, wiping) until they are visibly clean. When using in ultrasonic bath, cover the bath during sonication. After the cleaning step, remove objects from the solution and rinse with water of at least drinking quality. Dry outer surfaces subsequently, particularly the cavities (e.g. in endoscope channels).
For further reprocessing, we recommend our products from the Sekusept™ or Sekumatic™ product range.
Note: Make up cleaner solutions only with water (max. 25°C).
Application example 10 liters:
1% application solution = 100ml
Sekusept™ Cleaner + 9.9 liters water
Nicotinic surfactant, solvent, sequestrant, alkaline additive, perfume, colorant.
|Use (after commencement)||Shelf life|
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness.
The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.
Assuming that the application solution that is produced is not contaminated by organic material, it is to be stored in a clean, closed container or a covered instrument basin.
Please take note of the corresponding marking on the containers in which the disinfectant solutions are kept, e.g. contents, concentration, date, shelf life and batch number. Used and organically contaminated solutions are to be changed at least once per workday as per RKI recommendation.
|Chemical- physical data|
|Density||20 °C||1.04 g / cm3|
|pH value* (concentrate)||20 °C||approx. 12|
|pH-range * (1-2% solution)||20 °C||approx. 9 – 10|
* pH-value measurements under operating conditions always using pH-meter with temperature compensation.
Cleaning of medical devices
Please see below related offerings: