Powdered concentrate for the rapid, sporicidal, aldehyde-free environmental hygiene of medical devices and surfaces of all types. Bactericidal, yeasticidal, mycobactericidal, fungicidal and virucidal as per RKI recommendation of 01/2004 (DVV 2008) and sporicidal.
Broad-spectrum effect incl. virucidal, fungicidal and sporicidal
(e.g. Clostridium difficile spores). Safe even at the highest demands for environmental hygiene.
|Our performance||Your advantage|
|Short contact time||Fast and efficient room disinfection and short turnaround time|
|Low application concentration||Even in the event of an outbreak|
|Unique combination of agents PerOxyBalance||6pH-neutral application solution for high degree of material compatibility|
|Stability time: 24 h||Application solution is only to be prepared once daily|
|Can be used alternating with Incidin™ Pro and Incidin™ Rapid for environmental hygiene||Products can be switched without interim cleaning, simple integration into existing processes|
Wipe down the surfaces to be treated so they are wet. Ensure that the wetting is even. Ensure that sufficient ventilation is available. Protective gloves must be worn as per UVV.
1% Incidin™ Active Liquid contains:
> 600ppm peracetic acid. Minor color fluctuations in the powder do not signify any loss of quality.
|Use (after commencement)||Shelf life|
|in container1||until the printed expiration date|
|As a prepared application solution2||The same workday|
Please note the following to ensure the correct storage of environmental hygiene and instrument disinfectants: The original containers (canisters, buckets or bottles) with the disinfectant concentrate (or powder) should be stored at temperatures below 25°C and kept dry and clean. A brief period below or above the given storage temperature (e.g. during transport) will not diminish the effectiveness.
The containers are to be sealed tightly after each use. Please also take care that the concentrate remaining in the container is not contaminated when preparing the application solution.
Assuming that the application solution that is produced is not contaminated by organic material, it is to be stored in a clean, closed container or a covered instrument basin.
EPlease take note of the corresponding marking on the containers in which the disinfectant solutions are kept, e.g. contents, concentration, date, shelf life and batch number. Used and organically contaminated solutions are to be changed at least once per workday as per RKI recommendation.